PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 223-200010-001
223-200010-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, overall_height: 0.210 INCHES NOMINAL IN, overall_length: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, surface_treatment: OXIDE, material_thickness: 0.018 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-096-5264, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
223-200010-001
NSN: 5340-01-096-5264
FSC: 5340
CAGE: 20886 — COMPRO COMPUTER SERVICES, INC. DBA COMPRO (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
overall_height0.210 INCHES NOMINAL IN
overall_length0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
surface_treatmentOXIDE
material_thickness0.018 INCHES NOMINAL IN
mounting_hole_diameter0.187 INCHES NOMINAL IN
NSN5340-01-096-5264
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 223-200010-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: OXIDE
•
MATERIAL: STEEL
•
MOUNTING HOLE DIAMETER: 0.187 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.018 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTOXIDE
MATERIALSTEEL
OVERALL LENGTH0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.187 INCHES NOMINAL IN
OVERALL HEIGHT0.210 INCHES NOMINAL IN
OVERALL WIDTH0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
MATERIAL THICKNESS0.018 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2410-0001Interchangeable
interchangeable cross-reference
interchangeable
CMN6640Interchangeable
interchangeable cross-reference
interchangeable
MAN6640Interchangeable
interchangeable cross-reference
interchangeable
512011Interchangeable
interchangeable cross-reference
interchangeable
16-425Interchangeable
interchangeable cross-reference
interchangeable
16-425F00M00R00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 223-200010-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 223-200010-001?
223-200010-001 is a RETAINER,NUT AND BOLT.
What parts can replace 223-200010-001?
There are 7 known substitutes for 223-200010-001: 2410-0001, CMN6640, MAN6640 and 4 more. Substitute compatibility should be verified for your specific system.
Is 223-200010-001 still available?
223-200010-001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 223-200010-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026