222K142-100/184: INSULATION SLEEVING,ELECTRICAL,S.
INSULATION SLEEVING,ELECTRICAL,S. Key specifications include height: 1.220 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN, material: PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED, flexibility: FLEXIBLE, temp_rating: -20.0 CELSIUS DEGC, style_designator: BOOT-90 DEGREES, reliability_indicator: NOT ESTABLISHED. This part is cataloged in the U.S.
Government catalog under NSN 5970-01-392-0002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 1.220 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| material | PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED |
| flexibility | FLEXIBLE |
| temp_rating | -20.0 CELSIUS DEGC |
| special_features | INSIDE ADHESIVE COATED; LARGE END HAS LIP; SMALL END WALL THICKNESS TAPERS TO 0.016 IN.; TAB WITH 0.080 IN. DIA HOLE ON OUTER WALL ANGLE IN |
| style_designator | BOOT-90 DEGREES |
| reliability_indicator | NOT ESTABLISHED |
| environmental_protection | FLAME RESISTANT |
| minimum_tensile_strength | 1000 POUNDS PER SQUARE INCH LBS |
| main_body_large_end_inside_diameter | 1.160 INCHES MINIMUM AS SUPPLIED IN |
| main_body_small_end_inside_diameter | 0.280 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| material_document_and_classification | RT-1323, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| NSN | 5970-01-392-0002 |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.650 INCHES MINIMUM AS SUPPLIED IN |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.280 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| TEMP RATING | -20.0 CELSIUS DEGC |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 0.790 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.710 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY LARGE END INSIDE DIAMETER | 1.160 INCHES MINIMUM AS SUPPLIED IN |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.070 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| FLEXIBILITY | FLEXIBLE |
No substitute or cross-reference records for this part.