222D185-100/180-0: INSULATION SLEEVING,ELECTRICAL,S.
INSULATION SLEEVING,ELECTRICAL,S. Key specifications include height: 2.600 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN, material: ADHESIVE COATING, flexibility: SEMIFLEXIBLE, special_features: MATERIAL IS ZERCHAL POLYOLEFIN; LARGE END HAS LIP 0.120 INCH THICK IN, style_designator: BOOT-90 DEGREES, reliability_indicator: NOT ESTABLISHED. This part is cataloged in the U.S.
Government catalog under NSN 5970-01-519-2567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 2.600 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| material | ADHESIVE COATING |
| flexibility | SEMIFLEXIBLE |
| special_features | MATERIAL IS ZERCHAL POLYOLEFIN; LARGE END HAS LIP 0.120 INCH THICK IN |
| style_designator | BOOT-90 DEGREES |
| reliability_indicator | NOT ESTABLISHED |
| supplementary_features | HAS 2 MOLDING PORTS ON THE OUTER SIDE OF BEND: A 0.18 INCH DIA. INJECTION PORT 0.12 INCH FROM LARGE END AND A 0.12 INCH DIA. VENT PORT 2.80 INCHES FROM SMALL END IN |
| main_body_large_end_inside_diameter | 1.750 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| main_body_small_end_inside_diameter | 1.000 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| material_document_and_classification | S-1030 ADHESIVE MFR REF SINGLE MATERIAL RESPONSE COATING |
| large_end_wall_thickness_of_main_body | 0.160 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| small_end_wall_thickness_of_main_body | 0.120 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| NSN | 5970-01-519-2567 |
| MAIN BODY SMALL END INSIDE DIAMETER | 1.000 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 1.580 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| SUPPLEMENTARY FEATURES | HAS 2 MOLDING PORTS ON THE OUTER SIDE OF BEND: A 0.18 INCH DIA. INJECTION PORT 0.12 INCH FROM LARGE END AND A 0.12 INCH DIA. VENT PORT 2.80 INCHES FROM SMALL END IN |
| MAIN BODY LARGE END INSIDE DIAMETER | 1.750 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.160 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| FLEXIBILITY | SEMIFLEXIBLE |
| MATERIAL DOCUMENT AND CLASSIFICATION | S-1030 ADHESIVE MFR REF SINGLE MATERIAL RESPONSE COATING |
| SMALL END WALL THICKNESS OF MAIN BODY | 0.120 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
No substitute or cross-reference records for this part.