PartsTable
Technical Data Sheet
Download PDF

222214 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
Hama · TAPERED BEARING
PRODUCT OVERVIEW

222214: CONE AND ROLLERS,TAPERED ROLLER.

DCF radio clock DCF radio clock which automatically adjusts to the world's most accurate clock Time zone setting The time zone can be set manually if the DCF time differs from that of the time zone Fold-out base Can also be used as a table clock thanks to the fold-out base Phases of the moon Shows the current phases of the moon - from new moon to waning moon FSC FSC-certified: the paper and cardboard used in our packaging comes from sustainable forest management - enabling us to take a resources-sparing approach to the raw material of wood This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-0738, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
222214
NSN: 3110-00-100-0738
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.0100 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1719 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0738
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 222214 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1719 INCHES NOMINAL IN
•
CONE WIDTH: 1.0100 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1719 INCHES NOMINAL IN
CONE WIDTH1.0100 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
2776Reference document
Same NSN cross-reference
Reference document — Secondary reference
JD9011Reference document
Same NSN cross-reference
Reference document — Secondary reference
0222214-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
AA59649-185ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C181-34Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 222214?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 222214?
222214 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Hama.
What parts can replace 222214?
There are 5 known substitutes for 222214: 2776, JD9011, 0222214-9 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 222214?
222214 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 222214