PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 222-23SHMP2ITEN36
222-23SHMP2ITEN36 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 7.7490 INCHES MINIMUM AND 7.7500 INCHES MAXIMUM IN, overall_width: 2.4950 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: TWO LIPS ON OUTER RING DRAWN OVER SHOULDERS OF INNER RING,ID CHAMFERED BOTH SIDES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-1669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
222-23SHMP2ITEN36
NSN: 3110-00-159-1669
FSC: 3110
CAGE: 81782 — ALMON JOHNSON LTD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter7.7490 INCHES MINIMUM AND 7.7500 INCHES MAXIMUM IN
overall_width2.4950 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresTWO LIPS ON OUTER RING DRAWN OVER SHOULDERS OF INNER RING,ID CHAMFERED BOTH SIDES
style_designatorSEPARABLE INNER RACE, WITH ROLLER RETAINER, HARDENED AND GROUND
surface_treatmentCOPPER ALLOY RETAINER
overall_outside_diameter10.6234 INCHES MINIMUM AND 10.6250 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-159-1669
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 222-23SHMP2ITEN36 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 10.6234 INCHES MINIMUM AND 10.6250 INCHES MAXIMUM IN
•
SURFACE TREATMENT: COPPER ALLOY RETAINER
•
STYLE DESIGNATOR: SEPARABLE INNER RACE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
MATERIAL: STEEL OVERALL
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER10.6234 INCHES MINIMUM AND 10.6250 INCHES MAXIMUM IN
SPECIAL FEATURESTWO LIPS ON OUTER RING DRAWN OVER SHOULDERS OF INNER RING,ID CHAMFERED BOTH SIDES
SURFACE TREATMENTCOPPER ALLOY RETAINER
SURFACE TREATMENTCOPPER ALLOY RETAINER
STYLE DESIGNATORSEPARABLE INNER RACE, WITH ROLLER RETAINER, HARDENED AND GROUND
SPECIAL FEATURESTWO LIPS ON OUTER RING DRAWN OVER SHOULDERS OF INNER RING,ID CHAMFERED BOTH SIDES
MATERIALSTEEL OVERALL
ALIGNMENT TYPERIGID
OVERALL WIDTH2.4950 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM IN
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
20063Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYEInterchangeable
interchangeable cross-reference
interchangeable
10063Interchangeable
interchangeable cross-reference
interchangeable
3,307,637Interchangeable
interchangeable cross-reference
interchangeable
C-311-267Interchangeable
interchangeable cross-reference
interchangeable
29376Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 222-23SHMP2ITEN36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 222-23SHMP2ITEN36?
222-23SHMP2ITEN36 is a BEARING,ROLLER,NEEDLE.
What parts can replace 222-23SHMP2ITEN36?
There are 8 known substitutes for 222-23SHMP2ITEN36: 20063, GGG-D-751 TYE, 10063 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 222-23SHMP2ITEN36?
222-23SHMP2ITEN36 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-1669. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 222-23SHMP2ITEN36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026