PartsTable
Technical Data Sheet
Download PDF

22184434 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

22184434: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include center_hole_diameter: 30.51 MILLIMETERS MINIMUM AND 31.09 MILLIMETERS MAXIMUM MM, cross-sectional_height: 3.5 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM, part_name_assigned_by_controlling_agency: O'RING/JOINT OR 32,2X3. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-666-3775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22184434
NSN: 5331-01-666-3775
FSC: 5331 — O-ring
CAGE: A242N — VOLVO LASTVAGNAR AKTIEBOLAG (SWE)
SPECIFICATIONS
center_hole_diameter30.51 MILLIMETERS MINIMUM AND 31.09 MILLIMETERS MAXIMUM MM
cross-sectional_height3.5 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM
part_name_assigned_by_controlling_agencyO'RING/JOINT OR 32,2X3
NSN5331-01-666-3775
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22184434 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 3.5 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM
•
CENTER HOLE DIAMETER: 30.51 MILLIMETERS MINIMUM AND 31.09 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT3.5 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM
CENTER HOLE DIAMETER30.51 MILLIMETERS MINIMUM AND 31.09 MILLIMETERS MAXIMUM MM
PART NAME ASSIGNED BY CONTROLLING AGENCYO'RING/JOINT OR 32,2X3
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 4
7422184434Reference document
Same NSN cross-reference
Reference document — Informative reference only
82203026001Reference document
Same NSN cross-reference
Reference document — Informative reference only
5001006232Reference document
Same NSN cross-reference
Reference document — Secondary reference
R75500925Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 22184434?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22184434?
22184434 is a O-RING.
What parts can replace 22184434?
There are 4 known substitutes for 22184434: 7422184434, 82203026001, 5001006232 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22184434?
22184434 is cataloged in the U.S. Government catalog under NSN 5331-01-666-3775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22184434