PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2216LS-32
2216LS-32 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: LEATHER CATTLEHIDE OVERALL, outside_diameter: 2.701 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.352 INCHES MINIMUM AND 2.366 INCHES MAXIMUM IN, cross-sectional_thickness: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-1301, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2216LS-32
NSN: 5330-00-186-1301
FSC: 5330
CAGE: 97451 — HOUGHTON INTL INC (USA)
SPECIFICATIONS
materialLEATHER CATTLEHIDE OVERALL
outside_diameter2.701 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter2.352 INCHES MINIMUM AND 2.366 INCHES MAXIMUM IN
cross-sectional_thickness0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-186-1301
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2216LS-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 2.352 INCHES MINIMUM AND 2.366 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.701 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: LEATHER CATTLEHIDE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
APERTURE DIAMETER2.352 INCHES MINIMUM AND 2.366 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.701 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORCIRCULAR
MATERIALLEATHER CATTLEHIDE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
177632Interchangeable
interchangeable cross-reference
interchangeable
265-0202-002Interchangeable
interchangeable cross-reference
interchangeable
950763-507-2Interchangeable
interchangeable cross-reference
interchangeable
10826775-001Interchangeable
interchangeable cross-reference
interchangeable
71565Interchangeable
interchangeable cross-reference
interchangeable
LS4032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2216LS-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2216LS-32?
2216LS-32 is a GASKET.
What parts can replace 2216LS-32?
There are 13 known substitutes for 2216LS-32: 177632, 265-0202-002, 950763-507-2 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2216LS-32?
2216LS-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-1301. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2216LS-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026