PartsTable
Technical Data Sheet
Download PDF

22162-1ML — ADJUSTER,SLACK,BRAKE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

22162-1ML: ADJUSTER,SLACK,BRAKE.

The ADJUSTER,SLACK,BRAKE is a the manufacturer industrial component. Key specifications include shape: STRAIGHT, spline_type: STRAIGHT SPLINE, hole_diameter: 0.501 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN, major_diameter: 1.499 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, minor_diameter: 1.214 INCHES MINIMUM AND 1.215 INCHES MAXIMUM IN, adjustment_type: SINGLE ARM. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-184-1939, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22162-1ML
NSN: 4730-01-184-1939
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 09032 — TATE ANDALE, LLC (USA)
SPECIFICATIONS
shapeSTRAIGHT
spline_typeSTRAIGHT SPLINE
hole_diameter0.501 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
major_diameter1.499 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
minor_diameter1.214 INCHES MINIMUM AND 1.215 INCHES MAXIMUM IN
adjustment_typeSINGLE ARM
offset_distance0.625 INCHES NOMINAL IN
spline_quantity10
offset_directionLEFT
thread_directionRIGHT-HAND
torque_load_rating15000.000 INCH-POUNDS IN
locking_device_typeSPRING LOADED BALL
NSN4730-01-184-1939
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 22162-1ML · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
22162-1Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 22162-1ML?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22162-1ML?
22162-1ML is a ADJUSTER,SLACK,BRAKE.
What parts can replace 22162-1ML?
There is 1 known substitute for 22162-1ML: 22162-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 22162-1ML?
22162-1ML is cataloged in the U.S. Government catalog under NSN 4730-01-184-1939. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22162-1ML

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.