PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2214774-3
2214774-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.152 INCHES NOMINAL IN, height: 0.313 INCHES NOMINAL IN, length: 0.281 INCHES NOMINAL IN, material: STEEL COMP 1095, hole_diameter: 0.125 INCHES NOMINAL IN, furnished_items: LOCKNUT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-442-3248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2214774-3
NSN: 5340-00-442-3248
FSC: 5340
CAGE: 06401 — L3 TECHNOLOGIES, INC. DBA COMMUNICATION SYSTEMS-WEST DIV COMMUNICATION SYSTEMS-WEST (USA)
SPECIFICATIONS
width0.152 INCHES NOMINAL IN
height0.313 INCHES NOMINAL IN
length0.281 INCHES NOMINAL IN
materialSTEEL COMP 1095
hole_diameter0.125 INCHES NOMINAL IN
furnished_itemsLOCKNUT
surface_treatmentCADMIUM
material_document_and_classificationQQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-442-3248
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2214774-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 0.152 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1095
•
HEIGHT: 0.313 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
LENGTH: 0.281 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: CADMIUM
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH0.152 INCHES NOMINAL IN
MATERIALSTEEL COMP 1095
HEIGHT0.313 INCHES NOMINAL IN
HOLE DIAMETER0.125 INCHES NOMINAL IN
LENGTH0.281 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENTCADMIUM
FURNISHED ITEMSLOCKNUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
C28Interchangeable
interchangeable cross-reference
interchangeable
C28RFIInterchangeable
interchangeable cross-reference
interchangeable
10221D1-6Interchangeable
interchangeable cross-reference
interchangeable
B107.48 TY1CL2Interchangeable
interchangeable cross-reference
interchangeable
11108Interchangeable
interchangeable cross-reference
interchangeable
B107.48Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2214774-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2214774-3?
2214774-3 is a CLAMP,SYNCHRO.
What parts can replace 2214774-3?
There are 15 known substitutes for 2214774-3: C28, C28RFI, 10221D1-6 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2214774-3?
2214774-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-442-3248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2214774-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026