PartsTable
Technical Data Sheet
Download PDF

221194 — RADAR SET SUBASSEMBLY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

221194: RADAR SET SUBASSEMBLY.

The RADAR SET SUBASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN, outside_diameter: 2.879 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.874 INCHES MINIMUM AND 2.876 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-587-5892, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 221194
NSN: 5330-00-587-5892
NIINs: 005875892, 009689411
FSC: 5330 — Packing and Gasket Materials
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
outside_diameter2.879 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.874 INCHES MINIMUM AND 2.876 INCHES MAXIMUM IN
sealing_element_styleANGULAR
end_item_identificationAN/UPX-14(V)
accommodated_shaft_diameter1.750 INCHES NOMINAL IN
NSN5330-00-587-5892
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 221194 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 2.879 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.874 INCHES MINIMUM AND 2.876 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER2.879 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.874 INCHES MINIMUM AND 2.876 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
MATERIALRUBBER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
450291RReference document
Same NSN cross-reference
Reference document — Secondary reference
286W124T8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 221194?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 221194?
221194 is a RADAR SET SUBASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 221194?
There are 2 known substitutes for 221194: 450291R, 286W124T8. Substitute compatibility should be verified for your specific system.
What is the NSN for 221194?
221194 is cataloged in the U.S. Government catalog under NSN 5330-00-587-5892. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 221194