PartsTable
Technical Data Sheet
PartsTable / MRO / 22118
22118 ✓ Verified by PartsTable
Trust · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Comfortable wireless keyboard and mouse. Key specifications include material: PLASTIC OVERALL, rim_surface_width: 0.080 INCHES NOMINAL IN, peripheral_diameter: 0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN, center_hole_diameter: 0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, cross-sectional_height: 0.180 INCHES NOMINAL IN, cross-sectional_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3260, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 22118
NSN: 5330-00-004-3260
FSC: 5330
CAGE: 01343 — ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
rim_surface_width0.080 INCHES NOMINAL IN
peripheral_diameter0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
center_hole_diameter0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
cross-sectional_height0.180 INCHES NOMINAL IN
cross-sectional_thickness0.060 INCHES NOMINAL IN
cross-sectional_shape_styleFLANGE
NSN5330-00-004-3260
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22118 MFR: Trust ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIM SURFACE WIDTH: 0.080 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.180 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.080 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
MATERIALPLASTIC OVERALL
CROSS-SECTIONAL HEIGHT0.180 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
VG95236-T103Interchangeable
interchangeable cross-reference
interchangeable
AS22520/2-18Interchangeable
interchangeable cross-reference
interchangeable
M22520/2-18Interchangeable
interchangeable cross-reference
interchangeable
22118Interchangeable
interchangeable cross-reference
interchangeable
1039Interchangeable
interchangeable cross-reference
interchangeable
35-105Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22118?
22118 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Trust. It is classified as a MRO (MRO_GENERAL).
What parts can replace 22118?
There are 16 known substitutes for 22118: VG95236-T103, AS22520/2-18, M22520/2-18 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22118?
22118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3260. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026