PartsTable
Technical Data Sheet
Download PDF

22097C — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

22097C: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 0.4169 INCHES MINIMUM AND 0.4269 INCHES MAXIMUM IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN, body_outside_diameter: 0.2825 INCHES MINIMUM AND 0.2835 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-522-9990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22097C
NSN: 3120-00-522-9990
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 70147 — AERONAUTICAL MFG CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length0.4169 INCHES MINIMUM AND 0.4269 INCHES MAXIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
body_outside_diameter0.2825 INCHES MINIMUM AND 0.2835 INCHES MAXIMUM IN
material_document_and_classificationMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-522-9990
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 22097C · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 0.2825 INCHES MINIMUM AND 0.2835 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
•
BODY INSIDE DIAMETER: 0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER0.2825 INCHES MINIMUM AND 0.2835 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.4169 INCHES MINIMUM AND 0.4269 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.1860 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
SUBSTITUTES & CROSS-REFERENCES 1
22097Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 22097C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22097C?
22097C is a BEARING,SLEEVE.
What parts can replace 22097C?
There is 1 known substitute for 22097C: 22097. Substitute compatibility should be verified for your specific system.
What is the NSN for 22097C?
22097C is cataloged in the U.S. Government catalog under NSN 3120-00-522-9990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22097C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.