2207-387 — Technical Data Sheet

✓ Verified by PartsTable

— · NUT WASHER

WHAT YOU NEED TO KNOW

Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration

Don't mix grades — weakens the joint

PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL, pin_overall_length: 5.065 INCHES MINIMUM AND 5.095 INCHES MAXIMUM IN, pin_overall_diameter: 0.6150 INCHES MINIMUM AND 0.6155 INCHES MAXIMUM IN, first_end_taper_angle: 15.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5315-00-816-9757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2207-387

NSN: 5315-00-816-9757
FSC: 5315
CAGE: 82181 — WILLIAM SPENCER (USA)

SPECIFICATIONS

material	STEEL OVERALL
first_end_style	CHAMFERED
hardness_rating	25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
pin_overall_length	5.065 INCHES MINIMUM AND 5.095 INCHES MAXIMUM IN
pin_overall_diameter	0.6150 INCHES MINIMUM AND 0.6155 INCHES MAXIMUM IN
first_end_taper_angle	15.0 DEGREES NOMINAL
first_end_taper_length	0.037 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN
second_end_relationship_with_first_end	IDENTICAL
NSN	5315-00-816-9757

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL

•

HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL

•

MATERIAL: STEEL OVERALL

•

SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL

•

PIN OVERALL DIAMETER: 0.6150 INCHES MINIMUM AND 0.6155 INCHES MAXIMUM IN

•

FIRST END STYLE: CHAMFERED

•

PIN OVERALL LENGTH: 5.065 INCHES MINIMUM AND 5.095 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.037 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

FIRST END TAPER ANGLE	15.0 DEGREES NOMINAL
HARDNESS RATING	25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL	STEEL OVERALL
SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
PIN OVERALL DIAMETER	0.6150 INCHES MINIMUM AND 0.6155 INCHES MAXIMUM IN
FIRST END STYLE	CHAMFERED
PIN OVERALL LENGTH	5.065 INCHES MINIMUM AND 5.095 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.037 INCHES MINIMUM AND 0.076 INCHES MAXIMUM IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 4

126284InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

XM-79660-71L28-6.2U43-10-I-LInterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

05A231-02InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

12-7087InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

LIFECYCLE

StatusACTIVEGOVERNMENT REGISTRY

AvailabilityOEM and secondary market

RoHS CompliantEAR99Not HAZMAT

Ready to buy 2207-387?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2207-387?

2207-387 is a PIN,STRAIGHT,HEADLESS.

What parts can replace 2207-387?

There are 4 known substitutes for 2207-387: 126284, XM-79660-71L28-6.2U43-10-I-L, 05A231-02 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2207-387?

2207-387 is cataloged in the Federal Logistics Information System under NSN 5315-00-816-9757. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2207-387 — Technical Data Sheet

Request a Quote — 2207-387