PartsTable
Technical Data Sheet
Download PDF

2206P — MICROCIRCUIT,LINEAR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2206P: MICROCIRCUIT,LINEAR.

The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, body_width: 0.244 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN, body_height: 0.165 INCHES NOMINAL IN, body_length: 0.748 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN, attachment_method: SLOT, features_provided: HIGH STABILITY AND MONOLITHIC AND EXTERNALLY COMPENSATED. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-506-2196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2206P
NSN: 5330-00-506-2196
NIINs: 005062196, 012079761
FSC: 5330 — Packing and Gasket Materials
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
body_width0.244 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN
body_height0.165 INCHES NOMINAL IN
body_length0.748 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN
attachment_methodSLOT
features_providedHIGH STABILITY AND MONOLITHIC AND EXTERNALLY COMPENSATED
rim_surface_width0.125 INCHES NOMINAL IN
inclosure_materialPLASTIC
inner_groove_width0.812 INCHES NOMINAL IN
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
center_hole_diameter2.125 INCHES NOMINAL IN
input_circuit_pattern1 INPUT
NSN5330-00-506-2196
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2206P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT FEATURE QUANTITY: 2
•
CROSS-SECTIONAL HEIGHT: 0.812 INCHES NOMINAL IN
•
ATTACHMENT FEATURE LENGTH: 0.812 INCHES NOMINAL IN
•
ATTACHMENT FEATURE WIDTH: 0.625 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.125 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.812 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.125 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
ATTACHMENT FEATURE QUANTITY2
CROSS-SECTIONAL HEIGHT0.812 INCHES NOMINAL IN
ATTACHMENT FEATURE LENGTH0.812 INCHES NOMINAL IN
ATTACHMENT FEATURE WIDTH0.625 INCHES NOMINAL IN
RIM SURFACE WIDTH0.125 INCHES NOMINAL IN
INNER GROOVE WIDTH0.812 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.125 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
ATTACHMENT METHODSLOT
SUBSTITUTES & CROSS-REFERENCES 3
RW108310PC14Reference document
Same NSN cross-reference
Reference document — Secondary reference
RW108309PC14Reference document
Same NSN cross-reference
Reference document — Secondary reference
RY96196Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2206P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2206P?
2206P is a MICROCIRCUIT,LINEAR.
What parts can replace 2206P?
There are 3 known substitutes for 2206P: RW108310PC14, RW108309PC14, RY96196. Substitute compatibility should be verified for your specific system.
What is the NSN for 2206P?
2206P is cataloged in the U.S. Government catalog under NSN 5330-00-506-2196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2206P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.