PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 220602PC6
220602PC6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 3.875 INCHES NOMINAL IN, bolt_circle_diameter: 3.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.010 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-444-4864, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
220602PC6
NSN: 5330-00-444-4864
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter3.875 INCHES NOMINAL IN
bolt_circle_diameter3.250 INCHES NOMINAL IN
cross-sectional_thickness0.010 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-444-4864
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 220602PC6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PAPER OVERALL
•
OUTSIDE DIAMETER: 3.875 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 3.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPAPER OVERALL
OUTSIDE DIAMETER3.875 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.010 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT CIRCLE DIAMETER3.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
25450Interchangeable
interchangeable cross-reference
interchangeable
028390Interchangeable
interchangeable cross-reference
interchangeable
5431E5014Interchangeable
interchangeable cross-reference
interchangeable
TRU-5888Interchangeable
interchangeable cross-reference
interchangeable
GC811EP1Interchangeable
interchangeable cross-reference
interchangeable
RC967Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 220602PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 220602PC6?
220602PC6 is a GASKET.
What parts can replace 220602PC6?
There are 14 known substitutes for 220602PC6: 25450, 028390, 5431E5014 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 220602PC6?
220602PC6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-444-4864. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 220602PC6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026