PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 220460
220460 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The NOZZLE,FUEL INJECTION is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, temp_rating: -15.0 FAHRENHEIT AND 150.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: YELLOW, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-120-9242, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
220460
NSN: 4720-01-120-9242
FSC: 4720
CAGE: 62555 — VACU-BLAST CORP (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
temp_rating-15.0 FAHRENHEIT AND 150.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorYELLOW
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT, INVERTED FLARE FIRST END
outside_diameter0.782 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
burst_test_pressure1000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-120-9242
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 220460 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 1.250 INCHES IN
•
THREAD QUANTITY PER INCH: 14 FIRST END
•
MEDIA FOR WHICH DESIGNED: AIR AND WATER SINGLE RESPONSE
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED PLASTIC
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
HYDROSTATIC TEST PRESSURE: 500.0 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS1.250 INCHES IN
THREAD QUANTITY PER INCH14 FIRST END
MEDIA FOR WHICH DESIGNEDAIR AND WATER SINGLE RESPONSE
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED PLASTIC
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
INSIDE SURFACE CONDITIONSMOOTH
END CONNECTION DESIGNSTRAIGHT FIRST END
HYDROSTATIC TEST PRESSURE500.0 POUNDS PER SQUARE INCH LBS
SEAT ANGLE30.0 DEGREES FIRST END
OUTSIDE DIAMETER0.782 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
26-0207-46-08Interchangeable
interchangeable cross-reference
interchangeable
26-0207-46Interchangeable
interchangeable cross-reference
interchangeable
26-0207-46 ITEM 8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 220460?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 220460?
220460 is a NOZZLE,FUEL INJECTION.
What parts can replace 220460?
There are 3 known substitutes for 220460: 26-0207-46-08, 26-0207-46, 26-0207-46 ITEM 8. Substitute compatibility should be verified for your specific system.
What is the NSN for 220460?
220460 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-120-9242. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 220460

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026