PartsTable
Technical Data Sheet
Download PDF

220331 — CAPACITOR,FIXED,MICA DIELECTRIC

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

220331: CAPACITOR,FIXED,MICA DIELECTRIC.

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: STEEL CORROSION RESISTING, end_style: VERTEX OUTSIDE PERIPHERY, ring_style: STRAIGHT GAP, usage_design: EXTERNAL, hole_diameter: 0.317 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, heat_treatment: ANNEALED. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-499-3458, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 220331
NSN: 5310-00-499-3458
NIINs: 004993458, 009245439, 013841741, 016077938
FSC: 5310 — Nuts and Washers
CAGE: 08484 — BREEZE-EASTERN LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
end_styleVERTEX OUTSIDE PERIPHERY
ring_styleSTRAIGHT GAP
usage_designEXTERNAL
hole_diameter0.317 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
heat_treatmentANNEALED
surface_finish63.0 MICROINCHES BOTTOM
hardness_rating36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
inside_diameter2.187 INCHES MAXIMUM IN
strength_ratingERR-060
outside_diameter2.437 INCHES NOMINAL IN
style_designatorRECESSED BOTH SIDES
NSN5310-00-499-3458
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 220331 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES BOTTOM
•
TOP RECESS DIAMETER: 0.357 INCHES MINIMUM AND 0.362 INCHES MAXIMUM IN
•
BOTTOM RECESS DIAMETER: 0.357 INCHES MINIMUM AND 0.362 INCHES MAXIMUM IN
•
HEAT TREATMENT: ANNEALED
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
•
TOP RECESS ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: RECESSED BOTH SIDES
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES BOTTOM
SURFACE FINISH63.0 MICROINCHES TOP
TOP RECESS DIAMETER0.357 INCHES MINIMUM AND 0.362 INCHES MAXIMUM IN
BOTTOM RECESS DIAMETER0.357 INCHES MINIMUM AND 0.362 INCHES MAXIMUM IN
HEAT TREATMENTANNEALED
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM
TOP RECESS ANGLE45.0 DEGREES NOMINAL
STYLE DESIGNATORRECESSED BOTH SIDES
OUTSIDE DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIAL THICKNESS0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
2637507-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 220331?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 220331?
220331 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 220331?
There is 1 known substitute for 220331: 2637507-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 220331?
220331 is cataloged in the U.S. Government catalog under NSN 5310-00-499-3458. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 220331

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.