PartsTable
Technical Data Sheet
Download PDF

220269P2 — FERRULE,GROOVED CLAMP COUPLING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

220269P2: FERRULE,GROOVED CLAMP COUPLING.

The FERRULE,GROOVED CLAMP COUPLING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALLSTEEL OVERALL, flange_length: 0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN, overall_length: 1.400 INCHES MINIMUM AND 1.400 INCHES MINIMUM AND 1.410 INCHES MAXIMUM1.410 INCHES MAXIMUM IN, wall_thickness: 0.1559 INCHES MINIMUM AND 0.1559 INCHES MINIMUM AND 0.1653 INCHES MAXIMUM0.1653 INCHES MAXIMUM IN, special_features: FLANGE AT ONE END ALSOFLANGE AT ONE END ALSO, ferrule_inside_diameter: 0.339 INCHES MINIMUM AND 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM0.349 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-609-4744, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
220269P2
NSN: 5340-00-609-4744
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL OVERALLSTEEL OVERALL
flange_length0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
overall_length1.400 INCHES MINIMUM AND 1.400 INCHES MINIMUM AND 1.410 INCHES MAXIMUM1.410 INCHES MAXIMUM IN
wall_thickness0.1559 INCHES MINIMUM AND 0.1559 INCHES MINIMUM AND 0.1653 INCHES MAXIMUM0.1653 INCHES MAXIMUM IN
special_featuresFLANGE AT ONE END ALSOFLANGE AT ONE END ALSO
ferrule_inside_diameter0.339 INCHES MINIMUM AND 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM0.349 INCHES MAXIMUM IN
flange_outside_diameter0.614 INCHES MINIMUM AND 0.614 INCHES MINIMUM AND 0.616 INCHES MAXIMUM0.616 INCHES MAXIMUM IN
first_end_length_from_bead_center_to_end0.500 INCHES MINIMUM AND 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN
NSN5340-00-609-4744
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 220269P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WALL THICKNESS: 0.1559 INCHES MINIMUM AND 0.1559 INCHES MINIMUM AND 0.1653 INCHES MAXIMUM0.1653 INCHES MAXIMUM IN
•
FLANGE LENGTH: 0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
•
FERRULE INSIDE DIAMETER: 0.339 INCHES MINIMUM AND 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM0.349 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALLSTEEL OVERALL
•
FLANGE OUTSIDE DIAMETER: 0.614 INCHES MINIMUM AND 0.614 INCHES MINIMUM AND 0.616 INCHES MAXIMUM0.616 INCHES MAXIMUM IN
•
FIRST END LENGTH FROM BEAD CENTER TO END: 0.500 INCHES MINIMUM AND 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL LENGTH1.400 INCHES MINIMUM AND 1.400 INCHES MINIMUM AND 1.410 INCHES MAXIMUM1.410 INCHES MAXIMUM IN
WALL THICKNESS0.1559 INCHES MINIMUM AND 0.1559 INCHES MINIMUM AND 0.1653 INCHES MAXIMUM0.1653 INCHES MAXIMUM IN
FLANGE LENGTH0.050 INCHES MINIMUM AND 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM0.070 INCHES MAXIMUM IN
FERRULE INSIDE DIAMETER0.339 INCHES MINIMUM AND 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM0.349 INCHES MAXIMUM IN
SPECIAL FEATURESFLANGE AT ONE END ALSOFLANGE AT ONE END ALSO
MATERIALSTEEL OVERALLSTEEL OVERALL
FLANGE OUTSIDE DIAMETER0.614 INCHES MINIMUM AND 0.614 INCHES MINIMUM AND 0.616 INCHES MAXIMUM0.616 INCHES MAXIMUM IN
FIRST END LENGTH FROM BEAD CENTER TO END0.500 INCHES MINIMUM AND 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM0.520 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 220269P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 220269P2?
220269P2 is a FERRULE,GROOVED CLAMP COUPLING.
What is the NSN for 220269P2?
220269P2 is cataloged in the U.S. Government catalog under NSN 5340-00-609-4744. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 220269P2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.