PartsTable
Technical Data Sheet
PartsTable / MRO / 2202500-1
2202500-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TEMPERATURE SENSOR is a the manufacturer industrial component. Key specifications include diameter: 0.140 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.250 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-901-3839, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2202500-1
NSN: 5340-00-901-3839
FSC: 5340
CAGE: D9853 — ROCKWELL COLLINS DEUTSCHLAND GMBH DIV ROCKWELL COLLINS INTERNATIONAL & SERVICE SOLUTIONS (DEU)
SPECIFICATIONS
diameter0.140 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.250 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
end_item_identificationFCU H6-9.0 KW
distance_from_loop_center_to_tongue_end0.370 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.250 INCHES NOMINAL IN
NSN5340-00-901-3839
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2202500-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.250 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
DIAMETER: 0.140 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.370 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
DIAMETER0.140 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.370 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
101403Interchangeable
interchangeable cross-reference
interchangeable
13057Interchangeable
interchangeable cross-reference
interchangeable
905828-1Interchangeable
interchangeable cross-reference
interchangeable
2202500-1Interchangeable
interchangeable cross-reference
interchangeable
10140Interchangeable
interchangeable cross-reference
interchangeable
1533C0000TM REV A FIND NO 16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2202500-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2202500-1?
2202500-1 is a TEMPERATURE SENSOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2202500-1?
There are 6 known substitutes for 2202500-1: 101403, 13057, 905828-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2202500-1?
2202500-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-901-3839. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2202500-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026