PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2201A
2201A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CHASSIS,ELECTRICAL-ELECTRONIC EQ. Key specifications include material: STEEL, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, overall_depth: 20.180 INCHES NOMINAL IN, overall_width: 17.318 INCHES NOMINAL IN, design_feature: BLANK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-290-1532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2201A
NSN: 5330-00-290-1532
FSC: 5330
CAGE: 54395 — ELECTROMECH TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialSTEEL
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
overall_depth20.180 INCHES NOMINAL IN
overall_width17.318 INCHES NOMINAL IN
design_featureBLANK
overall_height6.960 INCHES NOMINAL IN
special_features220 WATTS,110V/60 HZ INPUT V
surface_treatmentNICKEL
housing_bore_diameter2.561 INCHES NOMINAL IN
sealing_element_styleANGULAR
end_item_identificationAIRCRAFT MODEL EA-6B
NSN5330-00-290-1532
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2201A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.561 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.561 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
3/4-11-1100TTInterchangeable
interchangeable cross-reference
interchangeable
70-104-10Interchangeable
interchangeable cross-reference
interchangeable
S70E41Interchangeable
interchangeable cross-reference
interchangeable
20AInterchangeable
interchangeable cross-reference
interchangeable
3445-3213-1164Interchangeable
interchangeable cross-reference
interchangeable
3159Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2201A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2201A?
2201A is a CHASSIS,ELECTRICAL-ELECTRONIC EQ.
What parts can replace 2201A?
There are 19 known substitutes for 2201A: 3/4-11-1100TT, 70-104-10, S70E41 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2201A?
2201A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-290-1532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2201A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026