PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 220100-16
220100-16 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: HOSE CLAMP,DUCT,DEFROST. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-706-0785, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
220100-16
NSN: 5310-00-706-0785
FSC: 5310
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyHOSE CLAMP,DUCT,DEFROST
NSN5310-00-706-0785
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 220100-16 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 20
•
NUT HEIGHT: 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NOMINAL THREAD SIZE0.250 INCHES IN
BEARING SURFACE TYPECHAMFERED
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH20
NUT HEIGHT0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
SURFACE TREATMENTCADMIUM OVERALL
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
21FA-420Interchangeable
interchangeable cross-reference
interchangeable
80007Interchangeable
interchangeable cross-reference
interchangeable
2201/0016Interchangeable
interchangeable cross-reference
interchangeable
5310PL0625588Interchangeable
Same NIIN cross-reference
interchangeable
149520007Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 220100-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 220100-16?
220100-16 is a CLAMP,HOSE.
What parts can replace 220100-16?
There are 5 known substitutes for 220100-16: 21FA-420, 80007, 2201/0016 and 2 more. Substitute compatibility should be verified for your specific system.
Is 220100-16 still available?
220100-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 220100-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026