PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2200818
2200818 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 0.751 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN, sealing_element_style: VERTICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-480-4629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2200818
NSN: 5330-00-480-4629
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
housing_bore_diameter0.751 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter0.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-480-4629
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2200818 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HOUSING BORE DIAMETER: 0.751 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 0.375 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: VERTICAL
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HOUSING BORE DIAMETER0.751 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
SEAL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER0.375 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
SEALING ELEMENT STYLEVERTICAL
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
3687Interchangeable
IBM SAS Cbl Yi Syst to SAS 3m
interchangeable
50385SInterchangeable
interchangeable cross-reference
interchangeable
182150Interchangeable
interchangeable cross-reference
interchangeable
T34864Interchangeable
interchangeable cross-reference
interchangeable
SAE-J20/2Interchangeable
interchangeable cross-reference
interchangeable
V12-018-006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2200818?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2200818?
2200818 is a SEAL,PLAIN ENCASED.
What parts can replace 2200818?
There are 15 known substitutes for 2200818: 3687, 50385S, 182150 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2200818?
2200818 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-480-4629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2200818

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026