PartsTable
Technical Data Sheet
Download PDF

22008-2 — CLAMP,HOSE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

22008-2: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include end_item_identification: 3810-01-549-0465, part_name_assigned_by_controlling_agency: CLAMP,V BAND,TURBOCHARGER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-022-0082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22008-2
NSN: 5310-00-022-0082
NIINs: 000220082, 010406646, 016071265
FSC: 5310 — Nuts and Washers
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
end_item_identification3810-01-549-0465
part_name_assigned_by_controlling_agencyCLAMP,V BAND,TURBOCHARGER
NSN5310-00-022-0082
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 22008-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.293 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 5 TYPE
•
NUT HEIGHT: 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
SURFACE TREATMENT: OXIDE OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.293 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
NONDEFINITIVE SPEC/STD DATA5 TYPE
NUT HEIGHT0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
SURFACE TREATMENTOXIDE OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH9
SUBSTITUTES & CROSS-REFERENCES 1
FFB571TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 22008-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22008-2?
22008-2 is a CLAMP,HOSE.
What parts can replace 22008-2?
There is 1 known substitute for 22008-2: FFB571TYPEA. Substitute compatibility should be verified for your specific system.
What is the NSN for 22008-2?
22008-2 is cataloged in the U.S. Government catalog under NSN 5310-00-022-0082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22008-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.