PartsTable
Technical Data Sheet
Download PDF

220042JM1 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

220042JM1: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include special_features: CONTAINS NON-ASBESTOS MATERIAL, gage_ring_thickness: 0.119 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, cross-sectional_thickness: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-439-4956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
220042JM1
NSN: 5330-01-439-4956
FSC: 5330 — Packing and Gasket Materials
CAGE: 0AT62 — SIEMENS ENERGY, INC. DBA DRESSER-RAND (USA)
SPECIFICATIONS
special_featuresCONTAINS NON-ASBESTOS MATERIAL
gage_ring_thickness0.119 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
cross-sectional_thickness0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-439-4956
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 220042JM1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
GAGE RING THICKNESS: 0.119 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
GAGE RING THICKNESS0.119 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
3079B NON-ASBESTOSReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 220042JM1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 220042JM1?
220042JM1 is a GASKET.
What parts can replace 220042JM1?
There is 1 known substitute for 220042JM1: 3079B NON-ASBESTOS. Substitute compatibility should be verified for your specific system.
What is the NSN for 220042JM1?
220042JM1 is cataloged in the U.S. Government catalog under NSN 5330-01-439-4956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 220042JM1