PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 22000 ITEM NO. 10
22000 ITEM NO. 10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 22000 ITEM NO. 10 is a the manufacturer industrial component. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-395-7815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22000 ITEM NO. 10
NSN: 5340-01-395-7815
FSC: 5340
CAGE: 66822 — MORPAC INDUSTRIES, INC DIV ACTUATOR (USA)
SPECIFICATIONS
Part Number22000 ITEM NO. 10
NSN5340-01-395-7815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22000 ITEM NO. 10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE SHAPE: SPECIAL
•
MOUNTING HOLE QUANTITY: 1
•
APERTURE LENGTH: 1.790 INCHES NOMINAL IN
•
APERTURE WIDTH: 1.100 INCHES NOMINAL IN
•
SHAPE: ROUND
•
OUTSIDE DIAMETER: 6.220 INCHES NOMINAL6.220 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE SHAPESPECIAL
SPECIAL FEATURES2 APERTURES
MOUNTING HOLE QUANTITY1
APERTURE LENGTH1.790 INCHES NOMINAL IN
APERTURE WIDTH1.100 INCHES NOMINAL IN
SHAPEROUND
OUTSIDE DIAMETER6.220 INCHES NOMINAL6.220 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A569 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER3.150 INCHES NOMINAL ALL HOLES IN
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
240-1566-00Interchangeable
interchangeable cross-reference
interchangeable
538427-6Interchangeable
interchangeable cross-reference
interchangeable
746916-107Interchangeable
interchangeable cross-reference
interchangeable
400251Interchangeable
interchangeable cross-reference
interchangeable
995-5B4642Interchangeable
interchangeable cross-reference
interchangeable
4642Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22000 ITEM NO. 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22000 ITEM NO. 10?
22000 ITEM NO. 10 is a 22000 ITEM NO. 10.
What parts can replace 22000 ITEM NO. 10?
There are 9 known substitutes for 22000 ITEM NO. 10: 240-1566-00, 538427-6, 746916-107 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22000 ITEM NO. 10?
22000 ITEM NO. 10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-395-7815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22000 ITEM NO. 10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026