PartsTable
Technical Data Sheet
Download PDF

22-81-1250 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

22-81-1250: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, end_radius: 0.625 INCHES NOMINAL IN, fork_depth: 1.870 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.578 INCHES NOMINAL IN, overall_width: 2.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-145-4715, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22-81-1250
NSN: 5340-01-145-4715
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
end_radius0.625 INCHES NOMINAL IN
fork_depth1.870 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.578 INCHES NOMINAL IN
overall_width2.500 INCHES NOMINAL IN
thread_length0.750 INCHES NOMINAL ROD CONNECTION IN
overall_height1.250 INCHES NOMINAL IN
fork_span_width1.270 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.610 INCHES NOMINAL IN
NSN5340-01-145-4715
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22-81-1250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.270 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.766 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.610 INCHES NOMINAL IN
•
END RADIUS: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,CLASS L,COND A,FIN 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.250 INCHES NOMINAL IN
FORK SPAN WIDTH1.270 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.766 INCHES NOMINAL IN
FORK ARM THICKNESS0.610 INCHES NOMINAL IN
END RADIUS0.625 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,CLASS L,COND A,FIN 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH2.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
SUBSTITUTES & CROSS-REFERENCES 2
211015277Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2642-723-02 ITEM 7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 22-81-1250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22-81-1250?
22-81-1250 is a CLEVIS,ROD END.
What parts can replace 22-81-1250?
There are 2 known substitutes for 22-81-1250: 211015277, 2642-723-02 ITEM 7. Substitute compatibility should be verified for your specific system.
What is the NSN for 22-81-1250?
22-81-1250 is cataloged in the U.S. Government catalog under NSN 5340-01-145-4715. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22-81-1250

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.