PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 22-449
22-449 ✓ Verified by PartsTable
Trust · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

USB studio microphone with HD audio quality, for outstandingly clear sound reproduction in streaming and recording. Key specifications include material: STEEL, construction: ONE-PIECE, usage_design: EXTERNAL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.000 INCHES NOMINAL IN, overall_height: 4.063 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-9363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22-449
NSN: 5330-00-211-9363
FSC: 5330
CAGE: 59618 — ALLIANCE LAUNDRY SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL
constructionONE-PIECE
usage_designEXTERNAL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.000 INCHES NOMINAL IN
overall_height4.063 INCHES NOMINAL IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
major_thickness0.100 INCHES NOMINAL IN
outside_diameter1.219 INCHES MINIMUM AND 1.223 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter1.087 INCHES NOMINAL IN
bolt_hole_quantity8
NSN5330-00-211-9363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22-449 MFR: Trust ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 8
•
BOLT CIRCLE DIAMETER: 9.625 INCHES NOMINAL IN
•
MATERIAL: CORK AND RUBBER CHLOROPRENE CLASS CR OVERALL
•
OUTSIDE DIAMETER: 10.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 F228000-1S9 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
APERTURE DIAMETER: 8.875 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY8
BOLT CIRCLE DIAMETER9.625 INCHES NOMINAL IN
MATERIALCORK AND RUBBER CHLOROPRENE CLASS CR OVERALL
OUTSIDE DIAMETER10.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 F228000-1S9 MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
APERTURE DIAMETER8.875 INCHES NOMINAL IN
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATORCIRCULAR
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
J85GInterchangeable
interchangeable cross-reference
interchangeable
4028-839Interchangeable
interchangeable cross-reference
interchangeable
SCD15907Interchangeable
interchangeable cross-reference
interchangeable
22449Interchangeable
interchangeable cross-reference
interchangeable
9B8213Interchangeable
interchangeable cross-reference
interchangeable
H22-449Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22-449?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22-449?
22-449 is a PARTS KIT,LINEAR ACTUATING CYLIN manufactured by Trust.
What parts can replace 22-449?
There are 9 known substitutes for 22-449: J85G, 4028-839, SCD15907 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22-449?
22-449 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-9363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22-449

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026