PartsTable
Technical Data Sheet
PartsTable / MRO / 22-028
22-028 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ABSORBER,OVERVOLTAGE is a the manufacturer industrial component. Key specifications include length: 29.0 MILLIMETERS NOMINAL MM, material: STEEL CORROSION RESISTING OVERALL, nut_style: KNURLED, seat_angle: 45.0 DEGREES NOMINAL, body_length: 0.285 INCHES MAXIMUM IN, current_type: DC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-9713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 22-028
NSN: 5330-00-211-9713
FSC: 5330
CAGE: 81142 — EATON CORP AXLE DIV (USA)
SPECIFICATIONS
length29.0 MILLIMETERS NOMINAL MM
materialSTEEL CORROSION RESISTING OVERALL
nut_styleKNURLED
seat_angle45.0 DEGREES NOMINAL
body_length0.285 INCHES MAXIMUM IN
current_typeDC
nut_diameter0.875 INCHES NOMINAL IN
thread_class2B
tip_diameter0.250 INCHES NOMINAL IN
hole_diameter0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hole_quantity6
nut_thickness0.163 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
NSN5330-00-211-9713
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22-028 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 8
•
BOLT CIRCLE DIAMETER: 5.500 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 4.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY8
BOLT CIRCLE DIAMETER5.500 INCHES NOMINAL IN
HOLE DIAMETER0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.010 INCHES NOMINAL IN
OUTSIDE DIAMETER6.625 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER4.500 INCHES NOMINAL IN
MATERIALPAPER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
95P8Interchangeable
interchangeable cross-reference
interchangeable
22028Interchangeable
interchangeable cross-reference
interchangeable
GPW9373Interchangeable
interchangeable cross-reference
interchangeable
145-00612Interchangeable
interchangeable cross-reference
interchangeable
145-00607Interchangeable
interchangeable cross-reference
interchangeable
947211-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22-028?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22-028?
22-028 is a ABSORBER,OVERVOLTAGE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 22-028?
There are 16 known substitutes for 22-028: 95P8, 22028, GPW9373 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22-028?
22-028 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-211-9713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22-028

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026