PartsTable
Technical Data Sheet
PartsTable / O-RING / 22 250 P11
22 250 P11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 4.870 INCHES MINIMUM AND 4.880 INCHES MAXIMUM IN, cross-sectional_height: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-071-8000, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
22 250 P11
NSN: 5331-00-071-8000
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER
center_hole_diameter4.870 INCHES MINIMUM AND 4.880 INCHES MAXIMUM IN
cross-sectional_height0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NSN5331-00-071-8000
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 22 250 P11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 4.870 INCHES MINIMUM AND 4.880 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
CROSS-SECTIONAL HEIGHT: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER4.870 INCHES MINIMUM AND 4.880 INCHES MAXIMUM IN
MATERIALRUBBER
CROSS-SECTIONAL HEIGHT0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
16387Interchangeable
interchangeable cross-reference
interchangeable
DN16387Interchangeable
interchangeable cross-reference
interchangeable
A997CPC30AInterchangeable
interchangeable cross-reference
interchangeable
35518PC14Interchangeable
interchangeable cross-reference
interchangeable
D6991REVBPC33Interchangeable
interchangeable cross-reference
interchangeable
1638700Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 22 250 P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 22 250 P11?
22 250 P11 is a O-RING.
What parts can replace 22 250 P11?
There are 14 known substitutes for 22 250 P11: 16387, DN16387, A997CPC30A and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 22 250 P11?
22 250 P11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-071-8000. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 22 250 P11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026