PartsTable
Technical Data Sheet
Download PDF

21F-CB2-SC-2.5IN ITEM 11 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

21F-CB2-SC-2.5IN ITEM 11: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: GRAPHITE OVERALL, special_features: DEFORMED GRAPHITE WITH BRAIDED GRAPHITE END RINGS, center_hole_diameter: 2.500 INCHES NOMINAL IN, end_item_identification: VALVE, STOP, part_name_assigned_by_controlling_agency: PACKING. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-622-2445, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
21F-CB2-SC-2.5IN ITEM 11
NSN: 5330-01-622-2445
FSC: 5330 — Packing and Gasket Materials
CAGE: 61661 — NEWMANS INC NEW JERSEY DIV (USA)
SPECIFICATIONS
materialGRAPHITE OVERALL
special_featuresDEFORMED GRAPHITE WITH BRAIDED GRAPHITE END RINGS
center_hole_diameter2.500 INCHES NOMINAL IN
end_item_identificationVALVE, STOP
part_name_assigned_by_controlling_agencyPACKING
NSN5330-01-622-2445
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 21F-CB2-SC-2.5IN ITEM 11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL: GRAPHITE OVERALL
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESDEFORMED GRAPHITE WITH BRAIDED GRAPHITE END RINGS
CENTER HOLE DIAMETER2.500 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING
END ITEM IDENTIFICATIONVALVE, STOP
MATERIALGRAPHITE OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
N5620-000 ITEM 11 2.5INSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 21F-CB2-SC-2.5IN ITEM 11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21F-CB2-SC-2.5IN ITEM 11?
21F-CB2-SC-2.5IN ITEM 11 is a PACKING,PREFORMED.
What parts can replace 21F-CB2-SC-2.5IN ITEM 11?
There is 1 known substitute for 21F-CB2-SC-2.5IN ITEM 11: N5620-000 ITEM 11 2.5IN. Substitute compatibility should be verified for your specific system.
What is the NSN for 21F-CB2-SC-2.5IN ITEM 11?
21F-CB2-SC-2.5IN ITEM 11 is cataloged in the U.S. Government catalog under NSN 5330-01-622-2445. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21F-CB2-SC-2.5IN ITEM 11