PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 21C116-06
21C116-06 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM, outside_diameter: 0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-145-4564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
21C116-06
NSN: 5310-01-145-4564
FSC: 5310
CAGE: 06602 — NEXTIRAONE SOLUTIONS LLC (USA)
SPECIFICATIONS
hole_diameter0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
outside_diameter0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentPASSIVATE OVERALL
material_thickness0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
nondefinitive_spec/std_data1 TYPE AND A GRADE AND 1 STYLE
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-145-4564
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 21C116-06 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 303SE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OUTSIDE DIAMETER0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 303SE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A GRADE AND 1 STYLE
SURFACE TREATMENTPASSIVATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
1218Interchangeable
interchangeable cross-reference
interchangeable
P25Interchangeable
interchangeable cross-reference
interchangeable
11501869Interchangeable
interchangeable cross-reference
interchangeable
5310PL0578660Interchangeable
interchangeable cross-reference
interchangeable
373-0003-000Interchangeable
interchangeable cross-reference
interchangeable
100354-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 21C116-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21C116-06?
21C116-06 is a WASHER,LOCK.
What parts can replace 21C116-06?
There are 11 known substitutes for 21C116-06: 1218, P25, 11501869 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 21C116-06?
21C116-06 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-145-4564. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21C116-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026