PartsTable
Technical Data Sheet
Download PDF

219T596 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

219T596: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.062 INCHES NOMINAL IN, style_designator: STRAIGHT, pin_chamfer_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-171-0749, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
219T596
NSN: 5315-01-171-0749
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 27315 — MORRIS MATERIAL HANDLING, INC. (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.062 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter2.000 INCHES NOMINAL IN
under_head_length4.250 INCHES NOMINAL IN
first_hole_diameter0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
material_document_and_classification127,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL
distance_from_centerline_of_hole_to_end_of_pin0.375 INCHES NOMINAL IN
NSN5315-01-171-0749
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 219T596 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 4.250 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 127,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.062 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH4.250 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER2.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION127,FSCM 27315 MFR REF SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLEFLAT
HEIGHT0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 219T596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 219T596?
219T596 is a PIN,STRAIGHT,HEADED.
What is the NSN for 219T596?
219T596 is cataloged in the U.S. Government catalog under NSN 5315-01-171-0749. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 219T596

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.