PartsTable
Technical Data Sheet
Download PDF

219P220 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

219P220: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.562 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, chamfer_length: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 30.750 INCHES NOMINAL IN, overall_diameter: 3.749 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN, special_features: 2 HOLES 0.562 IN. DIA,2 HOLES 0.813 IN.

DIA,3.375 IN. APART EACH END IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-171-5389, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
219P220
NSN: 5340-01-171-5389
FSC: 5340 — Hardware, Commercial
CAGE: 27315 — MORRIS MATERIAL HANDLING, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.562 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
chamfer_length0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_length30.750 INCHES NOMINAL IN
overall_diameter3.749 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN
special_features2 HOLES 0.562 IN. DIA,2 HOLES 0.813 IN. DIA,3.375 IN. APART EACH END IN
drilled_hole_locationBOTH ENDS
distance_from_end_to_hole_center4.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5340-01-171-5389
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 219P220 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OVERALL DIAMETER: 3.749 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN
•
DRILLED HOLE LOCATION: BOTH ENDS
•
HOLE DIAMETER: 0.562 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
•
DISTANCE FROM END TO HOLE CENTER: 4.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL DIAMETER3.749 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN
DRILLED HOLE LOCATIONBOTH ENDS
OVERALL LENGTH30.750 INCHES NOMINAL IN
SPECIAL FEATURES2 HOLES 0.562 IN. DIA,2 HOLES 0.813 IN. DIA,3.375 IN. APART EACH END IN
HOLE DIAMETER0.562 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
DISTANCE FROM END TO HOLE CENTER4.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 219P220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 219P220?
219P220 is a ROD,STRAIGHT,HEADLESS.
What is the NSN for 219P220?
219P220 is cataloged in the U.S. Government catalog under NSN 5340-01-171-5389. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 219P220

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.