PartsTable
Technical Data Sheet
Download PDF

219703 — SANDBAG SET,CERVICAL,X-RAY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

219703: SANDBAG SET,CERVICAL,X-RAY.

The SANDBAG SET,CERVICAL,X-RAY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, body_width: 1.406 INCHES MAXIMUM IN, nut_height: 0.203 INCHES NOMINAL IN, body_height: 1.500 INCHES MAXIMUM IN, body_length: 1.688 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-021-9703, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
219703
NSN: 5310-00-021-9703
NIINs: 000219703, 009015751, 014272435
FSC: 5310 — Nuts and Washers
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
body_width1.406 INCHES MAXIMUM IN
nut_height0.203 INCHES NOMINAL IN
body_height1.500 INCHES MAXIMUM IN
body_length1.688 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
inclosure_typeOPEN
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
frequency_rating380.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT
special_featuresBRAND NAME DESCRIPTION AQ1 - 12 GAUGE;ADDITIONAL ITEM INFORMATION AQ1 31 X 41-1/8 X .012,R;REQUIRED MINIMUM ORDER QUANTITY 1;REQUIRED MULTIPLE ORDER QUANTITY 1
NSN5310-00-021-9703
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 219703 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
NUT HEIGHT: 0.203 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NONDEFINITIVE SPEC/STD DATAA TYPE
NUT HEIGHT0.203 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
SUBSTITUTES & CROSS-REFERENCES 3
N39311BReference document
Same NSN cross-reference
Reference document — Secondary reference
MILB857TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
DX637AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 219703?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 219703?
219703 is a SANDBAG SET,CERVICAL,X-RAY.
What parts can replace 219703?
There are 3 known substitutes for 219703: N39311B, MILB857TYPEA, DX637A. Substitute compatibility should be verified for your specific system.
What is the NSN for 219703?
219703 is cataloged in the U.S. Government catalog under NSN 5310-00-021-9703. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 219703