PartsTable
Technical Data Sheet
Download PDF

2195570140 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2195570140: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 9.958 INCHES MINIMUM AND 10.092 INCHES MAXIMUM IN, center_hole_diameter: 9.445 INCHES MINIMUM AND 9.505 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-720-3228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2195570140
NSN: 5331-00-720-3228
FSC: 5331 — O-ring
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter9.958 INCHES MINIMUM AND 10.092 INCHES MAXIMUM IN
center_hole_diameter9.445 INCHES MINIMUM AND 9.505 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-00-720-3228
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2195570140 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 9.958 INCHES MINIMUM AND 10.092 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 9.445 INCHES MINIMUM AND 9.505 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER9.958 INCHES MINIMUM AND 10.092 INCHES MAXIMUM IN
CENTER HOLE DIAMETER9.445 INCHES MINIMUM AND 9.505 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 6
SAE-AS28775Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2-448 N304-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILP25732Reference document
Same NSN cross-reference
Reference document — Secondary reference
02195-5701-40Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS28775-448Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP568-448-4067-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 2195570140?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2195570140?
2195570140 is a O-RING.
What parts can replace 2195570140?
There are 6 known substitutes for 2195570140: SAE-AS28775, 2-448 N304-75, MILP25732 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2195570140?
2195570140 is cataloged in the U.S. Government catalog under NSN 5331-00-720-3228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2195570140