PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 219456
219456 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1040 OVERALL, first_end_style: CHAMFERED, second_end_style: SQUARE, pin_overall_length: 3.625 INCHES NOMINAL IN, first_hole_diameter: 0.281 INCHES NOMINAL IN, pin_overall_diameter: 1.1140 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-563-1350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
219456
NSN: 5315-00-563-1350
FSC: 5315
CAGE: 32537 — JOY GLOBAL UNDERGROUND MINING LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1040 OVERALL
first_end_styleCHAMFERED
second_end_styleSQUARE
pin_overall_length3.625 INCHES NOMINAL IN
first_hole_diameter0.281 INCHES NOMINAL IN
pin_overall_diameter1.1140 INCHES NOMINAL IN
first_end_taper_angle15.0 DEGREES NOMINAL
first_end_taper_length0.094 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
second_end_relationship_with_first_endNOT IDENTICAL
distance_from_centerline_of_hole_to_end_of_pin0.344 INCHES NOMINAL IN
NSN5315-00-563-1350
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 219456 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1040 OVERALL
•
FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL LENGTH: 3.625 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 1.1140 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.344 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1040 OVERALL
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
PIN OVERALL LENGTH3.625 INCHES NOMINAL IN
PIN OVERALL DIAMETER1.1140 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.344 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.094 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.281 INCHES NOMINAL IN
SECOND END STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
31251Interchangeable
interchangeable cross-reference
interchangeable
LU19Interchangeable
interchangeable cross-reference
interchangeable
7-31251Interchangeable
interchangeable cross-reference
interchangeable
WIRE-LUBEInterchangeable
interchangeable cross-reference
interchangeable
31-381Interchangeable
interchangeable cross-reference
interchangeable
EJA01F01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 219456?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 219456?
219456 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 219456?
There are 8 known substitutes for 219456: 31251, LU19, 7-31251 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 219456?
219456 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-563-1350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 219456

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026