PartsTable
Technical Data Sheet
Download PDF

219386 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

219386: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, thickness: 0.061 INCHES NOMINAL IN, body_length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN, body_diameter: 0.217 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN, cubic_measure: 0.024 CUBIC INCHES, hole_diameter: 0.209 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-005-6119, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 219386
NSN: 5310-00-005-6119
NIINs: 000056119, 006894708
FSC: 5310 — Nuts and Washers
CAGE: 31361 — WOODWARD, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.061 INCHES NOMINAL IN
body_length0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
body_diameter0.217 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN
cubic_measure0.024 CUBIC INCHES
hole_diameter0.209 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
overall_diameter0.436 INCHES NOMINAL IN
style_designatorAXIAL TERMINAL EACH END
electrical_resistance0.390 OHMS
NSN5310-00-005-6119
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 219386 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.436 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.209 INCHES NOMINAL IN
•
THICKNESS: 0.061 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.436 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.209 INCHES NOMINAL IN
THICKNESS0.061 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 219386?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 219386?
219386 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 219386?
219386 is cataloged in the U.S. Government catalog under NSN 5310-00-005-6119. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 219386

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.