PartsTable
Technical Data Sheet
Download PDF

219228 — CONTACT ELEMENT,PNEUMATIC NAILER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

219228: CONTACT ELEMENT,PNEUMATIC NAILER.

CONTACT ELEMENT,PNEUMATIC NAILER. Key specifications include supplementary_features: VSECK, end_item_identification: PASLODE MODEL F350S FRAMING NAILER, general_characteristics_item_description: FOR PROTECTING WOOD FROM MARRING BY NAILER. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-499-3603, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
219228
NSN: 5310-01-499-3603
NIINs: 014993603, 016717971
FSC: 5310 — Nuts and Washers
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
supplementary_featuresVSECK
end_item_identificationPASLODE MODEL F350S FRAMING NAILER
general_characteristics_item_descriptionFOR PROTECTING WOOD FROM MARRING BY NAILER
NSN5310-01-499-3603
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 219228 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: OIL
•
WASHER OUTSIDE DIAMETER: 0.937 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.687 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS
LUBRICATIONOIL
OVERALL HEIGHT0.395 INCHES NOMINAL IN
WASHER OUTSIDE DIAMETER0.937 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.687 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
SURFACE TREATMENTPHOSPHATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT, SPECIAL GLANGE NUT UNC W/PREVAILING TORQUE LOCK
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 2
219-0228Reference document
Same NSN cross-reference
Reference document — Secondary reference
03SFGL71614Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 219228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 219228?
219228 is a CONTACT ELEMENT,PNEUMATIC NAILER.
What parts can replace 219228?
There are 2 known substitutes for 219228: 219-0228, 03SFGL71614. Substitute compatibility should be verified for your specific system.
What is the NSN for 219228?
219228 is cataloged in the U.S. Government catalog under NSN 5310-01-499-3603. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 219228

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.