PartsTable
Technical Data Sheet
Download PDF

2190292-1 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2190292-1: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, overall_width: 1.490 INCHES NOMINAL IN, overall_height: 0.710 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, special_features: ONE CORNER 0.310 IN. RADIUS; ONE CORNER CUT AT ANGLE IN, surface_treatment: CHROMATE AND PRIMER AND PAINT.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-428-4062, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2190292-1
NSN: 5340-01-428-4062
FSC: 5340 — Hardware, Commercial
CAGE: 8B676 — BAE FLIGHT SYSTEMS INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
overall_width1.490 INCHES NOMINAL IN
overall_height0.710 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
special_featuresONE CORNER 0.310 IN. RADIUS; ONE CORNER CUT AT ANGLE IN
surface_treatmentCHROMATE AND PRIMER AND PAINT
mounting_hole_typePLAIN
mounting_hole_diameter0.098 INCHES NOMINAL IN
mounting_hole_quantity9
NSN5340-01-428-4062
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2190292-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 9
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMATE AND PRIMER AND PAINT
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY9
OVERALL HEIGHT0.710 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
OVERALL LENGTH2.500 INCHES NOMINAL IN
OVERALL WIDTH1.490 INCHES NOMINAL IN
SPECIAL FEATURESONE CORNER 0.310 IN. RADIUS; ONE CORNER CUT AT ANGLE IN
SURFACE TREATMENTCHROMATE AND PRIMER AND PAINT
MATERIALALUMINUM ALLOY 6061
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2190292-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2190292-1?
2190292-1 is a BRACKET,MOUNTING.
What is the NSN for 2190292-1?
2190292-1 is cataloged in the U.S. Government catalog under NSN 5340-01-428-4062. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2190292-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.