PartsTable
Technical Data Sheet
Download PDF

219-0116 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

219-0116: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1137 OVERALL, nut_style: HEXAGON, nut_height: 0.750 MILLIMETERS NOMINAL MM, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-500-5800, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
219-0116
NSN: 5310-01-500-5800
FSC: 5310 — Nuts and Washers
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1137 OVERALL
nut_styleHEXAGON
nut_height0.750 MILLIMETERS NOMINAL MM
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats1.090 MILLIMETERS NOMINAL MM
nominal_thread_size0.625 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
end_item_identification2320-01-452-5579
thread_quantity_per_inch18
NSN5310-01-500-5800
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 219-0116 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.090 MILLIMETERS NOMINAL MM
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT HEIGHT: 0.750 MILLIMETERS NOMINAL MM
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.090 MILLIMETERS NOMINAL MM
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT HEIGHT0.750 MILLIMETERS NOMINAL MM
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATION2320-01-452-5579
THREAD QUANTITY PER INCH18
SUBSTITUTES & CROSS-REFERENCES 1
219-0115Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 219-0116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 219-0116?
219-0116 is a NUT,PLAIN,HEXAGON.
What parts can replace 219-0116?
There is 1 known substitute for 219-0116: 219-0115. Substitute compatibility should be verified for your specific system.
What is the NSN for 219-0116?
219-0116 is cataloged in the U.S. Government catalog under NSN 5310-01-500-5800. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 219-0116

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.