PartsTable
Technical Data Sheet
Download PDF

2189476 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

2189476: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, flange_width: 0.0950 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN, style_designator: SOLID, EXTERNAL FLANGE ONE END, body_inside_diameter: 0.4380 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN, body_outside_diameter: 0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN, end_item_identification: ENGINE MODEL J52. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-385-7181, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2189476
NSN: 3120-01-385-7181
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
flange_width0.0950 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.4380 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN
body_outside_diameter0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN
end_item_identificationENGINE MODEL J52
NSN3120-01-385-7181
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 2189476 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, EXTERNAL FLANGE ONE END
•
BODY INSIDE DIAMETER: 0.4380 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.0950 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
TECHNICAL CHARACTERISTICS
BODY OUTSIDE DIAMETER0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
BODY INSIDE DIAMETER0.4380 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM IN
FLANGE WIDTH0.0950 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONENGINE MODEL J52
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
218476Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2189476?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2189476?
2189476 is a BEARING,SLEEVE.
What parts can replace 2189476?
There is 1 known substitute for 2189476: 218476. Substitute compatibility should be verified for your specific system.
What is the NSN for 2189476?
2189476 is cataloged in the U.S. Government catalog under NSN 3120-01-385-7181. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2189476