PartsTable
Technical Data Sheet
Download PDF

21876 — IBM V7000 600 GB 2.5-inch 10K HDD

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

21876: IBM V7000 600 GB 2.5-inch 10K HDD.

IBM V7000 600 GB 2.5-inch 10K HDD. Key specifications include material: STEEL COMP 1118 OVERALL, grip_length: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN, head_length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, stud_head_height: 0.250 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, minor_diameter_length: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-554-3197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 21876
NSN: 3110-00-554-3197
NIINs: 005543197, 010980775, 014350620
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 61038 — VICKERS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1118 OVERALL
grip_length0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
head_length0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
stud_head_height0.250 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
minor_diameter_length0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
turnlock_stud_head_styleFILLISTER WING
stud_shank_major_diameter0.182 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
turnlock_stud_shank_styleSTUD SHANK
surface_treatment_document_and_classificationQQ-P-416 TYPE 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN3110-00-554-3197
COMPONENT DIAGRAM
RELEASE LATCH 600GB NL-SAS 10K RPM 21876 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | 600GB | NL-SAS 10K RPM NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 21876 MFR OEM
KEY FEATURES
•
600GB Capacity
•
10K RPM Speed
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
SUBSTITUTES & CROSS-REFERENCES 10
2-055-024-375Reference document
Same NSN cross-reference
Reference document — Secondary reference
30-20080Reference document
Same NSN cross-reference
Reference document — Secondary reference
H2HC-DM7044-HW1-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
522224Reference document
Same NSN cross-reference
Reference document — Secondary reference
BMA-30BC02-TA22Reference document
Same NSN cross-reference
Reference document — Secondary reference
X74222 PIECE 25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 21876?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21876?
21876 is a IBM V7000 600 GB 2.5-inch 10K HDD. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 21876?
There are 10 known substitutes for 21876: 2-055-024-375, 30-20080, H2HC-DM7044-HW1-50 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 21876?
21876 is cataloged in the U.S. Government catalog under NSN 3110-00-554-3197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21876