PartsTable
Technical Data Sheet
Download PDF

2184287 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

2184287: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C BALL, bore_diameter: 0.3750 INCHES NOMINAL IN, overall_width: 0.5624 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-185-4039, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2184287
NSN: 3110-00-185-4039
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 440C BALL
bore_diameter0.3750 INCHES NOMINAL IN
overall_width0.5624 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
internal_clearance0.0007 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
overall_outside_diameter0.8750 INCHES NOMINAL IN
standard_tolerance_designationABEC NO.5
NSN3110-00-185-4039
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2184287 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0007 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
•
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
TECHNICAL CHARACTERISTICS
INTERNAL CLEARANCE0.0007 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
OVERALL WIDTH0.5624 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.8750 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE DIAMETER0.3750 INCHES NOMINAL IN
MATERIALSTEEL COMP 440C INNER RING
SUBSTITUTES & CROSS-REFERENCES 1
670305Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2184287?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2184287?
2184287 is a BEARING,BALL,DUPLEX.
What parts can replace 2184287?
There is 1 known substitute for 2184287: 670305. Substitute compatibility should be verified for your specific system.
What is the NSN for 2184287?
2184287 is cataloged in the U.S. Government catalog under NSN 3110-00-185-4039. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2184287

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.