PartsTable
Technical Data Sheet
Download PDF

218245 — GASKET

✓ Government record, cited
Braun · ORING SEAL
PRODUCT OVERVIEW

218245: GASKET.

The GASKET is a Braun industrial component. Key specifications include hole_diameter: 0.440 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.270 INCHES NOMINAL IN, aperture_diameter: 4.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-046-1991, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
218245
NSN: 5330-01-046-1991
NIINs: 010461991, 014848670
FSC: 5330 — Packing and Gasket Materials
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
hole_diameter0.440 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.270 INCHES NOMINAL IN
aperture_diameter4.875 INCHES NOMINAL IN
bolt_hole_quantity7
NSN5330-01-046-1991
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 218245 MFR: Braun ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 4.875 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 7
•
HOLE DIAMETER: 0.440 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
OVERALL WIDTH6.270 INCHES NOMINAL IN
APERTURE DIAMETER4.875 INCHES NOMINAL IN
BOLT HOLE QUANTITY7
HOLE DIAMETER0.440 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
459-6536Reference document
Same NSN cross-reference
Reference document — Informative reference only
210865Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 218245?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 218245?
218245 is a GASKET manufactured by Braun.
What parts can replace 218245?
There are 2 known substitutes for 218245: 459-6536, 210865. Substitute compatibility should be verified for your specific system.
What is the NSN for 218245?
218245 is cataloged in the U.S. Government catalog under NSN 5330-01-046-1991. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 218245