PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 217R
217R ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The PARTS KIT,UNIVERSAL JOINT is a the manufacturer industrial component. Key specifications include document_type: TECHNICAL MANUAL, end_item_name: VEHICLE, document_source: 76260, end_item_source: 99343, component_quantity: 18, document_identification: CAT UJ-71. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
217R
NSN: 3110-00-156-5263
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
document_typeTECHNICAL MANUAL
end_item_nameVEHICLE
document_source76260
end_item_source99343
component_quantity18
document_identificationCAT UJ-71
end_item_identificationAMERICAN MOTORS JEEP,AGAVGAMERICAN OTOARS JEEP,J SERIES,1962 THRU 1974
component_document_originINDUSTRIAL
component_document_page_number53
NSN3110-00-156-5263
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 217R · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODMACHINED
MATERIALSTEEL INNER RING
MATERIALSTEEL INNER RING
MATERIALPLASTIC PHENOLIC RETAINER
MATERIALSTEEL BALL
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
C6700ARInterchangeable
interchangeable cross-reference
interchangeable
940800Interchangeable
interchangeable cross-reference
interchangeable
D4267XRInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 217R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 217R?
217R is a PARTS KIT,UNIVERSAL JOINT.
What parts can replace 217R?
There are 3 known substitutes for 217R: C6700AR, 940800, D4267XR. Substitute compatibility should be verified for your specific system.
What is the NSN for 217R?
217R is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 217R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026