PartsTable
Technical Data Sheet
Download PDF

21751-205 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

21751-205: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.191 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN, thread_length: 0.256 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-161-7082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
21751-205
NSN: 5305-00-161-7082
FSC: 5305 — Screws
CAGE: U1605 — HONEYWELL AEROSPACE YEOVIL DIV AEROSPACE -YEOVIL (GBR)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.191 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
thread_length0.256 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-161-7082
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 21751-205 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: BS970 EN 58 SERIES,FSCM K7766 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.256 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONBS970 EN 58 SERIES,FSCM K7766 NATIONAL SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.256 INCHES MINIMUM AND 0.326 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
COM726914Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 21751-205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21751-205?
21751-205 is a SCREW,MACHINE.
What parts can replace 21751-205?
There is 1 known substitute for 21751-205: COM726914. Substitute compatibility should be verified for your specific system.
What is the NSN for 21751-205?
21751-205 is cataloged in the U.S. Government catalog under NSN 5305-00-161-7082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21751-205