217320: RELAY,ELECTROMAGNETIC.
The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include duty_type: CONTINUOUS, overall_width: 3.500 INCHES MAXIMUM IN, overall_height: 2.812 INCHES NOMINAL IN, overall_length: 3.625 INCHES MAXIMUM IN, environmental_protection: HUMIDITY RESISTANT AND VIBRATION RESISTANT, mounting_facility_pattern: RECTANGULAR SINGLE MOUNTING FACILITY. This part is cataloged in the U.S.
Government catalog under NSN 5945-00-445-3658, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| duty_type | CONTINUOUS |
| coil_quantity | 1 |
| overall_width | 3.500 INCHES MAXIMUM IN |
| overall_height | 2.812 INCHES NOMINAL IN |
| overall_length | 3.625 INCHES MAXIMUM IN |
| winding_quantity | 1 |
| environmental_protection | HUMIDITY RESISTANT AND VIBRATION RESISTANT |
| mounting_facility_pattern | RECTANGULAR SINGLE MOUNTING FACILITY |
| terminal_type_and_quantity | 8 THREADED STUD CONTACTS |
| winding_dc_resistance_rating | 44.5 OHMS NOMINAL SINGLE WINDING |
| unthreaded_mounting_hole_diameter | 0.216 INCHES MINIMUM AND 0.224 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |
| mounting_facility_type_and_quantity | 4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY |
| NSN | 5945-00-445-3658 |
| NONPILE-UP AUXILIARY CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY |
| OVERALL HEIGHT | 2.812 INCHES NOMINAL IN |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 440.0 AC |
| MOUNTING FACILITY PATTERN | RECTANGULAR SINGLE MOUNTING FACILITY |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.750 INCHES NOMINAL SINGLE MOUNTING FACILITY IN |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 50.0 AMPERES AC RESISTIVE LOAD |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 3.0 AMPERES AC MOTOR LOAD |
| DUTY TYPE | CONTINUOUS |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.224 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN |