PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 217-230

217-230 — Technical Data Sheet

✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The GEAR,DRIVE MOTION is a Hama industrial component. Key specifications include special_features: CAGE 75CR6 HOLD THE DESIGN CONTROL, DECRIPTION OF ITEM TO HOLD FOUR SOLAR PANEL ASSEMBLY, end_item_identification: 6117016185094, part_name_assigned_by_controlling_agency: STRUCTURE ASSEMBLY ROLL STAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-057-1247, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
217-230
NSN: 5310-00-057-1247
FSC: 5310
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
special_featuresCAGE 75CR6 HOLD THE DESIGN CONTROL, DECRIPTION OF ITEM TO HOLD FOUR SOLAR PANEL ASSEMBLY
end_item_identification6117016185094
part_name_assigned_by_controlling_agencySTRUCTURE ASSEMBLY ROLL STAND
NSN5310-00-057-1247
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 217-230 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD QUANTITY PER INCH: 18
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
SURFACE TREATMENT: PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD QUANTITY PER INCH18
THREAD SERIESUNF
NOMINAL THREAD SIZE0.625 INCHES IN
NUT STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATAA TYPE
SURFACE TREATMENTPHOSPHATE OVERALL
MATERIALSTEEL OVERALL
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
D35138Interchangeable
interchangeable cross-reference
interchangeable
571247Interchangeable
Same NIIN cross-reference
interchangeable
MILB857TYPEAInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 217-230?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 217-230?
217-230 is a GEAR,DRIVE MOTION manufactured by Hama.
What parts can replace 217-230?
There are 3 known substitutes for 217-230: D35138, 571247, MILB857TYPEA. Substitute compatibility should be verified for your specific system.
What is the NSN for 217-230?
217-230 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-057-1247. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 217-230

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026