PartsTable
Technical Data Sheet
Download PDF

217-007-0002 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

217-007-0002: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.632 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 0.471 INCHES NOMINAL IN, overall_width: 0.632 INCHES NOMINAL IN, overall_length: 0.620 INCHES NOMINAL IN, mounting_facility: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-548-4957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
217-007-0002
NSN: 5340-00-548-4957
FSC: 5340 — Hardware, Commercial
CAGE: 95542 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
height0.632 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width0.471 INCHES NOMINAL IN
overall_width0.632 INCHES NOMINAL IN
overall_length0.620 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
surface_treatmentUNABLE TO DECODE
material_thickness0.062 INCHES NOMINAL IN
first_surface_hole_size0.156 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
first_surface_hole_quantity2
NSN5340-00-548-4957
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 217-007-0002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.471 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.156 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HEIGHT: 0.632 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.471 INCHES NOMINAL IN
OVERALL LENGTH0.620 INCHES NOMINAL IN
OVERALL WIDTH0.632 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.156 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
HEIGHT0.632 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
SB83314S159Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 217-007-0002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 217-007-0002?
217-007-0002 is a STRIKE,CATCH.
What parts can replace 217-007-0002?
There is 1 known substitute for 217-007-0002: SB83314S159. Substitute compatibility should be verified for your specific system.
What is the NSN for 217-007-0002?
217-007-0002 is cataloged in the U.S. Government catalog under NSN 5340-00-548-4957. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 217-007-0002

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.