PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2165362PC217
2165362PC217 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SPLITSPLIT, style_designator: CIRCULAR, aperture_diameter: 15.750 INCHES MINIMUM AND 15.750 INCHES MINIMUM AND 15.781 INCHES MAXIMUM15.781 INCHES MAXIMUM IN, cross-sectional_height: 1.495 INCHES MINIMUM AND 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM1.505 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-953-5064, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2165362PC217
NSN: 5330-00-953-5064
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSPLITSPLIT
style_designatorCIRCULAR
aperture_diameter15.750 INCHES MINIMUM AND 15.750 INCHES MINIMUM AND 15.781 INCHES MAXIMUM15.781 INCHES MAXIMUM IN
cross-sectional_height1.495 INCHES MINIMUM AND 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM1.505 INCHES MAXIMUM IN
NSN5330-00-953-5064
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2165362PC217 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
APERTURE DIAMETER: 15.750 INCHES MINIMUM AND 15.750 INCHES MINIMUM AND 15.781 INCHES MAXIMUM15.781 INCHES MAXIMUM IN
•
CONSTRUCTION: SPLITSPLIT
•
CROSS-SECTIONAL HEIGHT: 1.495 INCHES MINIMUM AND 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM1.505 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
APERTURE DIAMETER15.750 INCHES MINIMUM AND 15.750 INCHES MINIMUM AND 15.781 INCHES MAXIMUM15.781 INCHES MAXIMUM IN
CONSTRUCTIONSPLITSPLIT
CROSS-SECTIONAL HEIGHT1.495 INCHES MINIMUM AND 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM1.505 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FF-C-00431Interchangeable
interchangeable cross-reference
interchangeable
44243Interchangeable
interchangeable cross-reference
interchangeable
7510-00-285-5995Interchangeable
interchangeable cross-reference
interchangeable
9-44243Interchangeable
interchangeable cross-reference
interchangeable
00944243000Interchangeable
interchangeable cross-reference
interchangeable
74382PC6Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2165362PC217?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2165362PC217?
2165362PC217 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 2165362PC217?
There are 6 known substitutes for 2165362PC217: FF-C-00431, 44243, 7510-00-285-5995 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2165362PC217?
2165362PC217 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-953-5064. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2165362PC217

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026